Redirecting...

The Heat Controller Duo from Aqua Medic is a water-resistant temperature sensor that will help you continuously measure and control the water temperature of your aquarium. It ensures a flow of the under gravel heater and also other heating systems.

Product Features:

• This measuring and regulating device is used for regulating conventional heating and underfloor heating. The accuracy of the measurement is 0.1 ºC
• The value can be set in increments of 0.1 ºC and can be adjusted to the nearest degree. The maximum load for both heaters is 1200 Watts, enough to come. The integrated double socket, therefore, allows the simultaneous supply of conventional heating and underfloor heating.
• The system is equipped with a temperature sensor. The LCD display continuously informs of the time, the current temperature, and the connection status of the connected devices.
• The heating cable is controlled by a timer, the cadence can be freely set. If the desired value is not reached, conventional heating is started in addition. In order to avoid overheating.

Technical details:

Display: 0.1 °C
Measurement range: 0.0 up to +50.0 °C
Resolution: 0.1 °C
Loading capacity of contact: 1,200 watts at 220 V AC
Air Humidity: below 80%
Adjustment range: 16 – 40 °C
Adjustment accuracy: +/- 1 °C
Power requirements: 220 V / 50 Hz